http://www.ghostbusters-france.net/forum/
http://www.ghostbusters-france.net/forum/viewtopic.php?t=2480
Je suis pas vraiment sûr d'en faire non plus, le côté construction m'attire beaucoup comme pour tous les autres props gb, mais c'est déjà pas évident de se déplacer avec un pack donc un blower...Ghostbusters Project a écrit :J'ai toujours rêvé d'en avoir un. Mais je doute mis mettre réellement un jour dessus.
Bon courage dans ton projet en tout cas.
pour lebloop.
Pack:
LC-1 ALICE pack frame
LC-1 shoulder straps
Custom kidney pad with two 2" D-rings, and LC-2 plastic kidney pad buckle
Aluminum cross brace (vertical and horizontal)
Main tank mount x 1 (1/8" x 4" x 15" approx.)
Grey vest with chest plates
Large main tank (grey) 9.5" x 36" tall
Small side tanks x 2 (green) 4" x 20" tall, 5" x 17.5" tall
Bicycle spotlights (Variflex, Cateye or King Sword) x2
Custom head rest x1
3" caution tape
Project boxes x 2 (Bud #PS11327-G, #PS11521-G)
Tamiya 1/35th Kampfpanzer Leopard kit # MM-164A (Tank kit used as greebles on the Bud boxes)
Chicago Miniture LED lenses (green domed, amber flat top)
Suitable larger green light cover
Toggle Switch x1
Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate)
Aluminum "pump boxes" x2
"Pump box" stamp
2' aluminum spacer tube x1 (1.5" long)
Suitable heatsinks for pump boxes x2
3/4" Parker brass fittings (BST-6 x3 )
6" sphere (red)
Parker brass Fittings (1/4 DD44B, 1/4 x 3/8 FF33B reducer, misc male straight fitting)
Suitable 1/2" hose
Small hose clamps x 2
Lower tray x1
Large black heatsink x1
Split loom (3/8" ) 6 ft approx
Decal set x 1 (clear-backed and chrome-backed)
Gun:
Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge
# 6 button head bolts (x36)
Nose cone
Nozzle tube/plate/tip (including discharge tube and nut assembly)
Back end cap x1
#8 button head bolts (x8)
U- Handle, with bolt, lock nut and plate
5" hose clamps x2
Ball valve/lever x1
AME bike grip x 1
3/4" Parker brass fittings (BST-6 x2, BST-6M x1)
Control box (x1)
Battery box (x1)
Toggle switch
Amber (x1) and red (x1) small light covers
Large green light cover x1
1/4" Brass elbow fitting
1/4" Brass straight fitting
1/4" OD Red tubing
2" seat belt webbing strap
1.25" mounting rings (for strap) x2
1/4" p-clamps (for strap) x2
Hoses:
Suitable hoses (1.5" OD - 2" OD) *preferably cloth/rubber-covered (possibly rubber bellows) x3
ST-N6 ,Male quick connect, female threads (Steel version) x3
Other:
Light kit
Sound kit
Speaker
Amplifier
Power source
:Hay merci Yep, mais j'avais cherché mais vite fait, en fait nous ne faisons pas ces diamètres....zutYep a écrit :Oh l'autre hey! Il y a les plans (et donc les réponses) juste quelque messages plus haut^^
Mais allez je te donne en versions métrique (simplifiées) va
Gauche: -diam: 120mm - longueur tube: 330mm
Centre: -diam: 240mm - longueur tube: 670mm
Droite: -diam: 100mm - longueur tube: 400mm
(je travaille dans la prod de tube pvc) C'est des normes US 